Home

About Us

Products

Contact

Link

Inquiries

Distributor

>>Japanese

Eleven Lab

General

Specifications

Minimum pattern width (mm)

0.1 (4 mil)

Minimum milling width (mm)

0.1 (4 mil)

Working area (X/Y/Z) (mm)

229 x 320 x 57 (9.0" x 12.6" x 2.24")

Table size (mm)

296 x 396 (11.6" x 15.6")

Control axis

X, Y, Z

Control motor

Stepper Motor

Resolution (µm) *3

0.625 (0.0246 mil)

Maximum Travel Speed (mm/sec.) *1

55 (2.17")

Spindle speed min^-1 (rpm)
Spindle motor

5,000 - 41,000
DC Spindle

Drilling (mm)

0.2 - 3.175 (8 - 125 mil)

Maximum drilling cycle (cycles/min.) *2

Maximum thickness of processed material (mm) *4

10 (0.4")

Tool change

Manual / Single step tool change

Milling method

Absolute

Incremental

Yes

Compressed air (Mpa)

---

Power consumption

100 - 240 V, 50-60 Hz, 150VA

Machine dimensions
W x D x H (mm)

435 x 575 x 430 (17.2" x 23" x 17")
With cabinet: 500 x 580 x 450 (19.7" x 23" x 18")

Machine weight (kg)

Approx. 28 (62 lbs)
With cabinet: Approx. 38 (84 lbs)

Interface

One USB or one RS-232C port

Standard equipement

Fiducial positioning camera (USB)*5
Software: EASY CAD, Conversion & CAM

Options and accessories

Cabinet (requires assembly)
Vacuum table
Software:
Vacuum cleaner
Video manual

Starter kit
(Optiion)

Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extention hose for Vacuum cleaner

Tools:	End mills
	Drill bit
	Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.

MITS General Catalog

English
(PDF file / 1.4MB)

MITS Electronics

5-1-9, Kajino-cho, Koganei-shi,
Tokyo 184-0002 JAPAN
TEL.+81 (0) 42 388 1051
FAX.+81 (0) 42 388 1060

E-MAIL