Speeding up the PCB Prototyping

In recent years, the development cycles for electronic devices have shortened
dramatically, speed demanding in order to win and maintain the competitive advantage
over new product lines.

To shorten the development of PCB cycles, there are following options:

Combined use of both simulator and board processing
Send in to boardshop as express
Use etching (chemical solutions) in the laboratory

However, each has its own debatable point.

Enormous initial investment for simulator
Possibility of leakage of information (intellectual property) and
increase in price when it's sent in as express
Cost incurred to dispose and control the chemical solution

Solution: mill/engrave with PCB prototyping machine!

Increase in PCB prototyping speed and control free from design information and chemical disposal.
More precise PCB is made than etching.

You can achieve efficiency for PCB prototyping.

Speed :	Process PCB right after design is completed.
Security :	Since the PCB is prototyped in your facility, the risk of having leakage of design/circuit information will diminish.
Eco. :	With milling/engraving prototyping, chemical solution disposal and control won't be necessary and also relieves environmental hazards.
Cost :	Low-cost in installation and operation cost

MITS, as a manufacture specialized in PCB prototyping machine, provides
remarkablyprecision products, tuned and calibrated with Japanese distinctive
thoughtful and carefulness.

Demanded in Prototyped PCBs

What many demands in the prototyped PCBs is prompt confirmation of the circuit
performance, necessary in order to shift over to mass production.

In order to do so, engineers shouldn't spend their valuable time on the solder mask and
silkscreen, whichrequired for mass production.

Over decades, MITS have distributed PCB prototyping machine to the customers and
throughoutits experience, MITS never heard the needs for solder mask and silkscreen
for prototyping.

This is because since the customer will design the circuit patterns on auto CAD, the
data or information necessary for mass production, solder mask and silkscreen, can be
read out in an instant.

MITS values increase in prototyping process speed, what many customer demands from
PCB prototyping.

Fine Processing

MITS PCB prototyping machines are suitable not only for typical PCB prototyping but also for fine processing of various types of materials.

MITS General Catalog

English
(PDF file / 1.8MB)

MITS Electronics

E-MAIL