Home About Us Products Contact Link Inquiries Distributor >>Japanese


Processing Materials Other than PCB

When fabricating materials other than PCBs, there are following prominent examples:

A. Counter boring, curving out, fabricating surface of materials with approximately 3mm thickness

Samples

This is capable with general prototyping machine. However, the user is required to
set and adjust the projection of the tool bit (milling depth) manually for counter boring
and curving out.


B. Counter boring, curving out, fabricating surface of materials with approximately 20mm thickness

Samples




C. Fabricating thick materials with 2.5-dimensional method

Samples


The concept of MITS is:
B.C
(1) When the thickness of material is fairly thick, it is necessary to check if there are enough spaces for the material to be placed in between the tip of the tool bit and machine tables (Z axis strokes). Please check "Maximum thickness of processed material" under the specification for each machine.
(2) It is also necessary to have the "Stepping Milling Method" function on the prototyping machine. (Read more) The point to perform such a fabrication is whether the Z axis can be numerically-controlled or not.


Model Maximum Thickness of Processed Material Stepping Milling Method Z axis Numerically-Control
Eleven Lab
Auto Lab
10mm Yes Yes
FP-21T
FP-21T Precision
30mm Yes Yes
Competitors
8 to 14mm No No





MITS General Catalog

English
(PDF file / 1.8MB)



MITS Electronics


5-1-9, Kajino-cho, Koganei-shi,
Tokyo 184-0002 JAPAN TEL.+81 (0) 42 388 1051
FAX.+81 (0) 42 388 1060

E-MAIL

Contact us : Inquiry Form


MITS USA, Inc.

E-mail :