- High-frequency Milling Cutters
4mil ( 0.1mm) or less
6mil ( 0.15mm) |
Since this size breaks easily, we recommend
using it on boards with copper plating of 18µm or less
in thickness and a spindle motor speed higher than 50,000
rpm, and milling speed slower.
|
8mil
( 0.2mm) |
Wherever possible, use this size
on boards with copper plating of 18 µm or less in thickness
and at slower than normal milling speeds. |
12mil
( 0.3mm) |
Wherever possible, use this size
on boards with copper plating of 18 µm or less in thickness. |
20mil
( 0.5mm) |
This size can be used under normal
operating conditions. |
-
Drills <
For making holes >
0.02", 0.078" - 0.59"
(0.05, 0.2 - 1.5mm) |
We have these sizes in 0.1 mm increments
in stock.
|
0.33"
( 0.85mm) |
In stock. |
0.63" - 1/8"
(1.6 - 3.175mm) |
We have these sizes in 0.2
mm increments in stock. |
- Forming Cutters (also called Routers) <
For making external and internal shapes >
We have sizes 1.0, 2.0, and 3.0 mm in stock.
- Aluminum Cutters < For
making external and internal shapes >
Especially suited for making external shapes
of teflon boards.
We have sizes 0.8, 1.0, 2.0, and 3.0 mm in stock.
|
