Home Products About Us Inquiries Distributor   >>Japanese


Auto Lab W

Specifications

Model
Auto Lab W
Minimum pattern width (mm) 0.1 (4 mil)
Minimum milling width (mm) 0.1 (4 mil)
Working area (X/Y/Z) (mm) 400 x 365 x 45*7
(15.7" x 14.3" x 1.8")
Table size (X/Y) (mm) 490 x 490 (19.3" x 19.3)
Control axis X, Y, Z
Control motor Stepper Motor
Resolution (µm) *3 0.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) *1 80 (3.15")
Spindle speed (min-1)
Spindle motor
5,000 - 62,000 (model 60)
5,000 - 100,000 (model 100)
DC Brushless Spindle
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum drilling cycle (cycles/min.) *2 55
Maximum thickness of processed material (mm) *4 30 (1.18")
Tool change Automatic / 10 (20 tools by option)
Milling method Absolute No
Incremental Yes
Compressed air (Mpa) ---
Power consumption 100 - 240 V, 50-60 Hz, 200VA
Machine dimensions
W x D x H (mm)
635 x 643 x 430 (25" x 25.3" x 17")
Machine weight (kg) Approx. 41 (90 lbs)
Interface One USB or one RS-232C port
Standard equipement Fiducial positioning camera x30 (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
Options and accessories Tool Change 20
Ring-setter / Precision ring-setter (manual)
Drilling ring
Microscope 100x
Software:
Vacuum cleaner
Starter kit
(Optiion)
Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extention hose for Vacuum cleaner

Tools: End mills
Drill bit
Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axes movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.
*7 z-axis stroke 50mm


MITS General Catalog

English
(PDF file / 1.8MB)




MITS Electronics

E-MAIL

Contact us : Inquiry Form