These days, the intensity with frequency on the electronics circuits has
ever become increased,
and it is widely applicable to many fields.
Particularly, the high-frequency circuit board is the field where the
comprehensive fine processing
technology of the PCB prototyping machine is put to the test.
MITS is getting to grips with this task by designing the machines, and
by the know-how of
high-precision processing technology.
>>Designing the high-frequency
circuit and the detail of the trial PCB
 |
| |
Maximizing the accumulation of the know-how in our
long history on PCB processing
machine has enabled us to realize the 50µm wide line and track
processing.
The compliant product : FP-21T Precision
|
 |
| |
Recently we have come to design the high-frequency
circuit using several kinds of CAD systems.
The output format of these circuit data is DXF, but some output
data does not constitute the
closed-loop that is difficult to detect by the naked eyes because
these CAD system does not
permit to draw a picture by single stroke of the brush, leading
to generate the open loop such
as duplicate lines.
In processing the pattern, inputting these incomplete data into
the software (called "Conversion")
may cause the errors. You have to modify the DXF data into the completely
intact closed-loop.
MITS is going to release a novel software that can automatically
modify these problematic
procedures with facility
It is scheduled to go on sale in September, 2007.
>>The detail about the DXF data
|
|
