Tool Protrusion Equipment

You can measure the protrusion length of the tool from the pressure foot
by the micro meter

Ultimately, the length of the protruded tool form the pressure foot has decisive influence upon the depth of the processing. You can measure the protrusion of the tools accurately by this product with the dial gauge.


Fine tuning	Easily viewable guage

Dimension W x D x H(mm): 115 x 58 x 25
(4.1" x 2.3" x 1.0")
Minimum measuring quantity: 0.001mm (0.04 mil)
Maximum measuring quantity: 0.14mm (5.5 mil)
Dial reading: 0-70-0
Equipped with the zero point adjustment jig

Compliant model
Z-axis controllable model except Eleven Lab.

MITS General Catalog

English
(PDF file / 1.4MB)

MITS Electronics

5-1-9, Kajino-cho, Koganei-shi,
Tokyo 184-0002 JAPAN TEL.+81 (0) 42 388 1051
FAX.+81 (0) 42 388 1060

E-MAIL